User:Wtv-411/Smart Card

WIP

---

Smart Cards were used on the WebTV and first-generation MSN TV service to take the user to a site, set up ISP options, etc. They were rarely utilized, and were removed on the MSN TV 2.

WebTV/MSN TV boxes support smart cards that are compliant with the ISO-7816 standard. Smart cards can hold up to 122 bytes of data.

Inserting a smart card

When a smart card is inserted into the WebTV/MSN TV receiver, it will show a message on the screen with the smart card name and a progress bar. In the background, the box will contact the URL from the wtv-smartcard-inserted-url header sent from headwaiter, which is usually wtv-smartcard:/insert. The box will POST the raw data read from the card to the URL. While official clients can supposedly send the smart card data raw, it has only been documented to send the data as a Base64 encoded string with every 4 bytes swapped:

POST wtv-smartcard:/insert\r\n
User-Agent: Mozilla/4.0 WebTV/2.6 (compatible; MSIE 4.0)\r\n
wtv-show-time-record: 4 <wtv-home:/home?>\r\n
wtv-request-type: primary\r\n
wtv-incarnation: 14\r\n
Content-type: application/octet-stream\r\n
Content-length: 36\r\n
\r\n
/fkMTtAd552bhZFIlVHbHcEI5kTa5kTO==QO

/fkMTtAd552bhZFIlVHbHcEI5kTa5kTO==QO -> Mkf/dAtTb255IFZhbHVlIEcHaTk5OTk5OQ==

The server will unswap the bytes, decode the data into its raw binary form, and then parse it as smart card data to determine what to do with it. While the specifics of the wtv-smartcard aren't well known, what is known is that the server will redirect the box to the website if the smart card data is for a "Go To" card and send an error page is the data is invalid.

In some cases, the box will send an error header (e.g: "error=-68") if something goes wrong.

Format

WebTV/MSN TV smart cards use a proprietary format to store data. There are two known versions of the format that WebTV Networks developed: version 1 and version 2. The only smart card known to be produced for WebTV boxes (the Sony smart card bundled with Sony INT-W200 Internet Terminals) uses the version 2 format, though.

Thanks to internal WebTV pages from a "smart card factory" service containing JavaScript that directly handled writing in both formats, these formats have been able to be reverse engineered to varying degrees of success. This page will currently only cover the version 2 smart card format though, since that is the format we have the most information on.

Version 2

Version 2 smart cards make use of a header and TLVs (type-length-value) to store data. A TLV performs one specific function based on the type specified and stores data in a specific way. Version 2 smart cards can have one TLV at minimum for the main card data that corresponds to the card type in the header. If the card type is not a deregistration card, the smart card can also contain an optional title TLV, which has to precede all other TLVs and contains text that will be displayed as a title in a dialog box when the smart card is inserted into the WebTV/MSN TV box. Multiple TLVs in general can be added if the card type isn't set to deregistration or if it is set as a "multi" card, which can perform several functions at once.

The general format for version 2 smart cards goes like this:

Offset	Length	Description
0x00	1 byte	Version identifier. Always 2 (0x32)
0x01	1 byte	Card type
0x02	1 byte	CRC value. This is an optional field and a value of 0xff can be specified to make WebTV/MSN TV ignore the CRC
0x03	Variable	TLV data

TLVs are simple structures that store data under a specified type. They can technically hold up to 256 bytes of data, and follow this format:

Field	Type	Description
Type	uint8	Type code
Length	uint8	8-bit length of value
Value	Byte array	Variable length value data

Known Card Types

• A - Affinity. This feature is currently undocumented, but involves an enrollment and program code
• F - Favorites
• W - Deregistration. Only the deregstration TLV can be present in the smart card data if this type is set
• O - OpenISP (Use your own ISP)
• G - Go To (a website)
• M - Multi-card. Stores multiple TLVs to run several card functions at one time

Known TLVs

TLVs will be listed by their type code.

"t" (Title)

• Description: Specifies a title to give the smart card. Optional, but has to precede all other TLVs. This TLV can not be present in deregistration smart cards
• Value: The title for the smart card

"A" (Affinity data)

• Description: Required for Affinity smart cards
• Value: A byte for the version number (either 1 for version 1 Affinity data or 2 for version 2 Affinity data), followed by the actual data.
  • For version 2 Affinity data: The format is the program code, a tab character (0x09), and the enrollment code
  • For version 1 Affinity data: Just the enrollment code is added

"G" (Go To data)

• Description: Data that defines a website the smart card will make the box access. The wtv-smartcard service would have taken care of redirecting the client to the specified site if it existed. Required for "Go To" smart cards
• Value: A byte for the type of website to be accessed (i - Server-side numeric ID that will be translated by the WebTV/MSN TV service, h - HTTP URL, s - HTTPS URL), followed by a numeric ID if the type is i, or the direct URL for the site without the "http(s)://" prefix.

"O" (OpenISP)

• Description: Data for setting up a predefined custom ISP to connect to WebTV/MSN TV with. Required for OpenISP smart cards
• Value: "1", followed by the ISP data separated with a tab character (0x09)

ISP information structure:

• ISP name - String
• 0x09 separator
• ISP login name - String
• 0x09 separator
• ISP password - String
• 0x09 separator
• Primary modem number - 10-digit phone number
• 0x09 separator
• Backup modem number - 10-digit phone number. Optional

"W" (Deregistration)

• Description: Data for de-registering a client. If this TLV is used, then the card type must be set to deregistration as well and no other TLVs may be added
• Value: Binary structure

Deregistration data structure:

Offset	Length	Description
0x00	4 bytes	Contains a specific sequence of bytes (in hex: 31 75 fa b0). Purpose for these is unknown
0x04	4 bytes	A UNIX timestamp for when the deregistration card expires. On the WebTV smart card factory pages, this is always set to 0xffffffff to set it to not expire
0x08	Variable	Deregistration code

Example

The following example shows a break down of the data from an official Sony INT-W200 smart card, which uses the version 2 smart card format and is a "Go to" card. The card would have originally sent to the service a site ID of 999999, which would redirect the user to the Sony-operated site http://svalue.com (no longer run by Sony).

Field	Value
Version	"2" (0x32)
Type	"G" (Go to)
CRC	0xFF (Ignore)
TLV #1 Type	"t" (Title)
TLV #1 Length	0x0B
TLV #1 Value	"Sony Value "
TLV #2 Type	"G" (Go to)
TLV #2 Length	0x07
TLV #2 Value	"i999999" (Server-side numeric ID 999999 - points to http://svalue.com on the original server)

TODO

Client-Side

WebTV and MSN TV boxes have the ability to write to compatible smart cards inserted into their smart card slot. This is done with the client command client:SaveToSmartCard?data={data}, with {data} being the raw smart card data, which can be URL encoded if necessary.